EZ15 for conduits Ø 4 - 20 mm

EZ15 Pull Line Blower

The Pull Line Blower EZ15 by Zeitler was especially designed to feed pull line in micro-ducts Ø 4 to 20 mm (internal diameter) on short distances (up to 500 m). 
In only 30 seconds the pull line finds its way floating on air through a 500 m conduit.

Facts

  • To blow special pull line into micro-ducts
    (internal diameter from 4 to 20 mm)
  • For fiber optics technology
  • Installations in the range of private houses, office and industrial buildings
  • Ideal for short distances e.g. junction box to home
  • Easy to handle 
  • Lightweight and compact
  • Ready for use in seconds
  • For use with a standard commercial compressor 200-300l/min (not included in scope of delivery)
  • Fast feeding (500 m in 20 s) 
  • Excellent accessibility, even in confined spaces
  • Equiped with safety valves and overpressure protection
  • Fits in any car boot 

Application

  1. Choose tube coupling according to duct diameter
  2. Connect micro-duct to chosen tube coupling
  3. Thread special pull line into micro-duct
  4. Connect tube coupling to EZ15
  5. Switch on compressor
  6. Connect pneumatic hose to EZ15
  7. Observe uncoiling of pull line in cylinder
  8. Pull line leaves micro-duct
  9. Uncouple pneumatic hose from EZ15
  10. Uncouple tube coupling from micro-duct
  11. Cut off special pull line
  12. Link cable to pull line

Standard equipment in strong plastic case

  • 1 x Pull Line Blower EZ15
  • 1 x tube coupling for each outer diameter 6, 8, 10, 12 and 14 mm (other dimensions on request)
  • 1 x compressed air hose (3 m length)
  • 1 x universal hose attachement (base + multi nozzle for internal diameter 13 – 20 mm) 
  • 1 x T-fitting (to lift top)
  • 1 x box with spare parts and sissors
  • 4 x special pull line rolls ( Ø 1 mm, tensile strength approx. 24 kg, roll approx. 900 m)
  • 1x operating manual
Go back